* * *
Benvenuto! Effettua l'accesso oppure registrati.
19 Aprile 2021, 13:43:50

Inserisci il nome utente, la password e la durata della sessione.

Links

ads

Benvenuto


Benvenuto su la Community CentOS-Italia.Org

La Community Italiana di Linux CentOS e' lieta di averti tra noi , CentOS-Italia.Org e' un risorsa di guide e forum dal principiante al sistemista senior.
Clicca qua per registrati ora

La registrazione e' gratuita e ti consente di avere pieno accesso alle risorse di CentOS-Italia.org , come uso della ricerca avanzata , le funzioni interattive del portale e visualizzare i links nei post.
Gli utenti registrati non visualizzano gli ads, quindi registrati subito se non l'hai gia fatto.

Lo staff di CentOS-Italia.Org cerca di rendere la community un posto piacevole e il piu' produttivo possibile, invitiamo quindi i nuovi utenti a leggere le regole base.
Per info o problemi di registrazione scrivere a centos (at) centos-italia.org .

Autore Topic: Lettore Secure Digital  (Letto 5821 volte)

Offline Yoghi

  • Full Member
  • ***
  • Post: 66
    • Mostra profilo
Lettore Secure Digital
« il: 15 Giugno 2011, 17:54:15 »
Ciao a tutti.
Questo il mio primo post su questo forum.
Sono qui a chiedervi aiuto.
Vi espongo il problema:
Ho un notebook con CentOS 5.6 installato che non riconosce le schede SD.
il lettore di tipo interno, oltre a questo vi un lettore di CF (Compact Flash) che invece funziona regolarmente.
Vorrei utilizzare le SD come Backup di alcuni dati.
Come posso fare per risolvere il problema?

Grazie


Offline dankan77

  • Moderator
  • Hero Member
  • *****
  • Post: 1365
    • Mostra profilo
    • E-mail
Re: Lettore Secure Digital
« Risposta #1 il: 15 Giugno 2011, 23:45:17 »
Ciao e benvenuto.
Per prima cosa potresti provare ad inserire la memoria sd nel device lanciare il comando dmesg dalla shell per capire se il sistema recepisce la sd ed il lettore funziona.
Posta pure il risultato

Ciao

Offline Yoghi

  • Full Member
  • ***
  • Post: 66
    • Mostra profilo
Re: Lettore Secure Digital
« Risposta #2 il: 16 Giugno 2011, 00:18:41 »
Grazie per il benvenuto
Questo il risultato di dmesg
volevo precisare che non c' un'ambiente grafico
il sistema basilare

Codice: [Seleziona]
Linux version 2.6.18-238.12.1.el5 (mockbuild@builder10.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-50)) #1 SMP Tue May 31 13:23:01 EDT 2011
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000010000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
 BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001f6f0000 (usable)
 BIOS-e820: 000000001f6f0000 - 000000001f6fb000 (ACPI data)
 BIOS-e820: 000000001f6fb000 - 000000001f700000 (ACPI NVS)
 BIOS-e820: 000000001f700000 - 0000000020000000 (reserved)
 BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved)
 BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
502MB LOWMEM available.
Memory for crash kernel (0x0 to 0x0) notwithin permissible range
disabling kdump
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 128752
  DMA zone: 4096 pages, LIFO batch:0
  Normal zone: 124656 pages, LIFO batch:31
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP (v000 FUJ                                   ) @ 0x000f5d70
ACPI: RSDT (v001 FUJ    FJNB189  0x01280000 FUJ  0x00000100) @ 0x1f6f4c1a
ACPI: FADT (v001 FUJ    FJNB189  0x01280000 FUJ  0x00000100) @ 0x1f6faf8c
ACPI: SSDT (v001 FUJ    FJNB189  0x01280000 INTL 0x20030522) @ 0x1f6fab42
ACPI: BOOT (v001 FUJ    FJNB189  0x01280000 FUJ  0x00000100) @ 0x1f6faf64
ACPI: DSDT (v001 FUJ    FJNB189  0x01280000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0xfc08
Allocating PCI resources starting at 30000000 (gap: 20000000:dec10000)
Detected 1200.109 MHz processor.
Built 1 zonelists.  Total pages: 128752
Kernel command line: ro root=/dev/VolGroup00/LogVol00
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (013f9000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c076c000 soft=c074c000
PID hash table entries: 2048 (order: 11, 8192 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 502056k/515008k available (2190k kernel code, 12324k reserved, 911k data, 228k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop (skipped), value calculated using timer frequency.. 2400.21 BogoMIPS (lpj=1200109)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afe9f9ff 00000000 00000000 00000000 00000180 00000000 00000000
CPU: After vendor identify, caps: afe9f9ff 00000000 00000000 00000000 00000180 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps: afe9f1ff 00000000 00000000 00000040 00000180 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 14k freed
ACPI: Core revision 20060707
ACPI: setting ELCR to 0200 (from 0800)
CPU0: Intel(R) Pentium(R) M processor 1.20GHz stepping 08
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=340 bytes
sizeof(dentry)=136 bytes
sizeof(ext3inode)=492 bytes
sizeof(buffer_head)=52 bytes
sizeof(skbuff)=176 bytes
checking if image is initramfs... it is
Freeing initrd memory: 3281k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd982, last bus=3
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: ACPI Dock Station Driver: 1 docks/bays found
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region fc00-fc7f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region fc80-fcbf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
PCI: Bus #03 (-#06) is hidden behind transparent bridge #01 (-#03) (try 'pci=assign-busses')
Please report the result to linux-kernel to fix this permanently
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 8 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
pnp: 00:01: iomem range 0xcd200-0xcffff could not be reserved
pnp: 00:01: iomem range 0xffb00000-0xffbfffff could not be reserved
pnp: 00:01: iomem range 0xfec10000-0xfec1ffff could not be reserved
PCI: Bus 2, cardbus bridge: 0000:01:0a.0
  IO window: 00003400-00000000
  IO window: 00003800-00000000
  PREFETCH window: 30000000-00000000
  MEM window: 36000000-00000000
PCI: Bus 3, cardbus bridge: 0000:01:0a.1
  IO window: 00003c00-00000000
  IO window: 00001000-00000000
  PREFETCH window: 32000000-00000000
  MEM window: 38000000-00000000
PCI: Bridge: 0000:00:1e.0
  IO window: 3000-0000
  MEM window: d0200000-00000000
  PREFETCH window 0x0000000030000000-0x0000000033ffffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
ACPI: PCI Interrupt 0000:01:0a.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
Simple Boot Flag at 0x7f set to 0x1
apm: BIOS not found.
audit: initializing netlink socket (disabled)
type=2000 audit(1308187918.789:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
alg: No test for crc32c (crc32c-generic)
ksign: Installing public key data
Loading keyring
- Added public key 95732D6B52470C6F
- User ID: CentOS (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:02.0
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 855 Chipset.
agpgart: Detected 8060K stolen memory.
agpgart: AGP aperture is 128M @ 0xd8000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt for device 0000:00:1f.6 disabled
brd: module loaded
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
ICH4: chipset revision 3
ICH4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x2420-0x2427, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x2428-0x242f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: WDC WD1600BEVE-00UYT0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: MATSHITADVD-RAM UJ-822S, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2
ide-floppy driver 0.99.newide
Yenta: CardBus bridge found at 0000:01:0a.0 [10cf:1254]
Yenta: ISA IRQ mask 0x04b8, PCI irq 11
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff
pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
Yenta: CardBus bridge found at 0000:01:0a.1 [10cf:1254]
Yenta: ISA IRQ mask 0x04b8, PCI irq 11
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#01) from #03 to #06
pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff
pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
ACPI: (supports S0 S3 S4 S5)
Initalizing network drop monitor service
Freeing unused kernel memory: 228k freed
Write protecting the kernel read-only data: 413k
Time: acpi_pm clocksource has been installed.
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 11, io mem 0xd0100000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 11, io base 0x000020c0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 11, io base 0x000020e0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
Synaptics Touchpad, model: 1, fw: 5.9, id: 0xf6eb1, caps: 0xa04753/0x2000
input: SynPS/2 Synaptics TouchPad as /class/input/input1
SCSI subsystem initialized
libata version 3.00 loaded.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
device-mapper: dm-raid45: initialized v0.2594l
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
type=1404 audit(1308187943.757:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
security:  3 users, 6 roles, 1991 types, 265 bools, 1 sens, 1024 cats
security:  61 classes, 78571 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext3), uses xattr
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1308187944.373:3): policy loaded auid=4294967295 ses=4294967295
intel_rng: FWH not detected
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
8139cp 0000:01:0c.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
8139cp 0000:01:0c.0: Try the "8139too" driver instead.
ieee80211_crypt: registered algorithm 'NULL'
8139too Fast Ethernet driver 0.9.27
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
ACPI: PCI Interrupt 0000:01:0c.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
eth0: RealTek RTL8139 at 0xe0174000, 00:0b:5d:8e:bb:05, IRQ 11
eth0:  Identified 8139 chip type 'RTL-8101'
ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
ACPI: PCI Interrupt 0000:01:0d.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
input: PC Speaker as /class/input/input2
hdc: ATAPI 31X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ipw2200: ipw2200-bss.fw request_firmware failed: Reason -2
ipw2200: Unable to load firmware: -2
ipw2200: failed to register network device
ACPI: PCI interrupt for device 0000:01:0d.0 disabled
ipw2200: probe of 0000:01:0d.0 failed with error -5
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 50403 usecs
intel8x0: clocking to 48000
PCI: Enabling device 0000:00:1f.6 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.6 to 64
floppy0: no floppy controllers found
work still pending
lp: driver loaded but no devices found
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [CMB1] (battery present)
ACPI: Battery Slot [CMB2] (battery absent)
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Lid Switch [LID]
ACPI: Mapper loaded
dell-wmi: No known WMI GUID found
input: Video Bus as /class/input/input3
ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: multipath: version 1.0.6 loaded
loop: loaded (max 8 devices)
EXT3 FS on dm-0, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hda1, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 1015800k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:1015800k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
Loading iSCSI transport class v2.0-871.
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
cxgb3i: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
iscsi: registered transport (cxgb3i)
IPv6: Loaded, but administratively disabled, reboot required to enable
Broadcom NetXtreme II CNIC Driver cnic v2.1.2 (May 26, 2010)
Broadcom NetXtreme II iSCSI Driver bnx2i v2.1.3 (Aug 10, 2010)
iscsi: registered transport (bnx2i)
iscsi: registered transport (tcp)
iscsi: registered transport (iser)
iscsi: registered transport (be2iscsi)
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
« Ultima modifica: 16 Giugno 2011, 00:20:44 di Yoghi »

Offline smeserver

  • Hero Member
  • *****
  • Post: 1313
    • Mostra profilo
Re: Lettore Secure Digital
« Risposta #3 il: 16 Giugno 2011, 00:57:18 »
in console, lancia
Codice: [Seleziona]
tail -f /var/log/messages

poi inserisci la schedina e guarda cosa dice il log.. e riporta qui

Offline Yoghi

  • Full Member
  • ***
  • Post: 66
    • Mostra profilo
Re: Lettore Secure Digital
« Risposta #4 il: 16 Giugno 2011, 01:00:26 »
ecco cosa mi riporta il "tail -f /var/log/messages"
sia prima che dopo l'inserimento di una SD

Codice: [Seleziona]

Jun 16 03:32:57 nikita kernel: cxgb3i: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
Jun 16 03:32:57 nikita kernel: iscsi: registered transport (cxgb3i)
Jun 16 03:32:57 nikita kernel: IPv6: Loaded, but administratively disabled, reboot required to enable
Jun 16 03:32:57 nikita kernel: Broadcom NetXtreme II CNIC Driver cnic v2.1.2 (May 26, 2010)
Jun 16 03:32:57 nikita kernel: Broadcom NetXtreme II iSCSI Driver bnx2i v2.1.3 (Aug 10, 2010)
Jun 16 03:32:57 nikita kernel: iscsi: registered transport (bnx2i)
Jun 16 03:32:57 nikita kernel: iscsi: registered transport (tcp)
Jun 16 03:32:57 nikita kernel: iscsi: registered transport (iser)
Jun 16 03:32:57 nikita kernel: iscsi: registered transport (be2iscsi)
Jun 16 03:32:57 nikita kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1


Offline dankan77

  • Moderator
  • Hero Member
  • *****
  • Post: 1365
    • Mostra profilo
    • E-mail
Re: Lettore Secure Digital
« Risposta #5 il: 16 Giugno 2011, 10:52:02 »
Farei una prova attivando selinux in modalit permissive:

getenforce

setenforce 0

getenforce

Ciao

Offline Yoghi

  • Full Member
  • ***
  • Post: 66
    • Mostra profilo
Re: Lettore Secure Digital
« Risposta #6 il: 16 Giugno 2011, 15:35:52 »
Ho seguito i comandi che hai scritto in sequenza, dopo ho inserito la SD ma niente.

Offline dankan77

  • Moderator
  • Hero Member
  • *****
  • Post: 1365
    • Mostra profilo
    • E-mail
Re: Lettore Secure Digital
« Risposta #7 il: 17 Giugno 2011, 12:01:02 »
Il dubbio che ci dovrebbe essere almeno la visibilit di un log che mostri un interrupt lato sistema.
Sicuro che il lettore non sia guasto?
Prova a dare il comando

lsusb

dovresti trovare qualcosa del genere:

Bus 001 Device 004: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader

Posta pure il risultato.

Ciao

Offline Yoghi

  • Full Member
  • ***
  • Post: 66
    • Mostra profilo
Re: Lettore Secure Digital
« Risposta #8 il: 17 Giugno 2011, 14:45:05 »
Ciao la scheda funziona correttamente, perch l'ho testata sotto windows XP prima di usare CentOS
Il notebook un Fujitsu Siemens - LIFEBOOK P7010
Il controller SD un RICOH R5C592 SD/Memorystick CONTROLLER

il comando lsusb non me lo ritrovo quindi ho dato lspci



lspci -v

Codice: [Seleziona]

[root@nikita ~]# lspci -v
00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
Subsystem: Fujitsu Limited. Device 11d5
Flags: bus master, fast devsel, latency 0
Memory at <unassigned> (32-bit, prefetchable)
Capabilities: [40] Vendor Specific Information: Len=05 <?>
Kernel driver in use: agpgart-intel

00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
Subsystem: Fujitsu Limited. Device 11d5
Flags: bus master, fast devsel, latency 0

00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
Subsystem: Fujitsu Limited. Device 11d5
Flags: bus master, fast devsel, latency 0

00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02) (prog-if 00 [VGA controller])
Subsystem: Fujitsu Limited. Device 1282
Flags: fast devsel, IRQ 11
Memory at d8000000 (32-bit, prefetchable) [size=128M]
Memory at d0000000 (32-bit, non-prefetchable) [size=512K]
I/O ports at 2430 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: [d0] Power Management version 1
Kernel modules: intelfb

00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
Subsystem: Fujitsu Limited. Device 1282
Flags: fast devsel
Memory at e0000000 (32-bit, prefetchable) [size=128M]
Memory at d0080000 (32-bit, non-prefetchable) [size=512K]
Capabilities: [d0] Power Management version 1

00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI])
Subsystem: Fujitsu Limited. Device 11ab
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at 20c0 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI])
Subsystem: Fujitsu Limited. Device 11ab
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at 20e0 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd

00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03) (prog-if 20 [EHCI])
Subsystem: Fujitsu Limited. Device 11ab
Flags: bus master, medium devsel, latency 0, IRQ 11
Memory at d0100000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port: BAR=1 offset=0080
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=06, sec-latency=64
I/O behind bridge: 00003000-00003fff
Memory behind bridge: d0200000-d02fffff
Prefetchable memory behind bridge: 30000000-37ffffff

00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 03)
Flags: bus master, medium devsel, latency 0
Kernel modules: intel-rng

00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: Fujitsu Limited. Device 11ab
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at 2420 [size=16]
Memory at 38000000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: PIIX_IDE
Kernel modules: ata_piix

00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03)
Subsystem: Fujitsu Limited. Device 11ab
Flags: medium devsel, IRQ 11
I/O ports at 2400 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801

00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
Subsystem: Fujitsu Limited. Device 127d
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at 1800 [size=256]
I/O ports at 2080 [size=64]
Memory at d0100c00 (32-bit, non-prefetchable) [size=512]
Memory at d0100800 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Kernel driver in use: Intel ICH
Kernel modules: snd-intel8x0

00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03) (prog-if 00 [Generic])
Subsystem: Fujitsu Limited. Device 10d1
Flags: bus master, medium devsel, latency 0, IRQ 11
I/O ports at 1c00 [size=256]
I/O ports at 2000 [size=128]
Capabilities: [50] Power Management version 2
Kernel driver in use: Intel ICH Modem
Kernel modules: snd-intel8x0m

01:0a.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ab)
Subsystem: Fujitsu Limited. Device 1254
Flags: bus master, medium devsel, latency 168, IRQ 11
Memory at d0203000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=01, secondary=02, subordinate=02, sec-latency=176
Memory window 0: 30000000-33fff000 (prefetchable)
Memory window 1: 3c000000-3ffff000
I/O window 0: 00003400-000034ff
I/O window 1: 00003800-000038ff
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus

01:0a.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ab)
Subsystem: Fujitsu Limited. Device 1254
Flags: bus master, medium devsel, latency 168, IRQ 11
Memory at d0204000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=01, secondary=03, subordinate=06, sec-latency=176
Memory window 0: 34000000-37fff000 (prefetchable)
Memory window 1: 40000000-43fff000
I/O window 0: 00003c00-00003cff
I/O window 1: 00001000-000010ff
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus

01:0a.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 03) (prog-if 10 [OHCI])
Subsystem: Fujitsu Limited. Device 1255
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at d0200000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [dc] Power Management version 2
Kernel modules: firewire-ohci

01:0a.3 System peripheral: Ricoh Co Ltd R5C576 SD Bus Host Adapter (rev 01)
Subsystem: Fujitsu Limited. Device 1256
Flags: medium devsel, IRQ 11
Memory at d0200800 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2

01:0a.4 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter
Subsystem: Fujitsu Limited. Device 1257
Flags: medium devsel, IRQ 11
Memory at d0200c00 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2

01:0c.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Fujitsu Limited. Device 1213
Flags: bus master, medium devsel, latency 64, IRQ 11
I/O ports at 3000 [size=256]
Memory at d0201000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Kernel driver in use: 8139too
Kernel modules: 8139too, 8139cp

01:0d.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)
Subsystem: Intel Corporation Device 2702
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at d0202000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2





lspci | grep -i SD

Codice: [Seleziona]

01:0a.3 System peripheral: Ricoh Co Ltd R5C576 SD Bus Host Adapter (rev 01)


Offline dankan77

  • Moderator
  • Hero Member
  • *****
  • Post: 1365
    • Mostra profilo
    • E-mail
Re: Lettore Secure Digital
« Risposta #9 il: 17 Giugno 2011, 15:28:07 »
Prova a postare il risultato del seguente comando  :

 modprobe -l |grep sdhci

Ciao

Offline Yoghi

  • Full Member
  • ***
  • Post: 66
    • Mostra profilo
Re: Lettore Secure Digital
« Risposta #10 il: 17 Giugno 2011, 15:32:52 »

modprobe -l |grep sdhci


Codice: [Seleziona]

/lib/modules/2.6.27.57-aspide/kernel/drivers/mmc/host/sdhci.ko
/lib/modules/2.6.27.57-aspide/kernel/drivers/mmc/host/sdhci-pci.ko



Ho provato anche aggiornando il kernel

Offline dankan77

  • Moderator
  • Hero Member
  • *****
  • Post: 1365
    • Mostra profilo
    • E-mail
Re: Lettore Secure Digital
« Risposta #11 il: 17 Giugno 2011, 15:54:18 »
Ora prova a dare questi 2 comandi:

modprobe /lib/modules/2.6.27.57-aspide/kernel/drivers/mmc/host/sdhci.ko

modprobe /lib/modules/2.6.27.57-aspide/kernel/drivers/mmc/host/sdhci-pci.ko

e vediamo cosa dice il sistema

Offline Yoghi

  • Full Member
  • ***
  • Post: 66
    • Mostra profilo
Re: Lettore Secure Digital
« Risposta #12 il: 17 Giugno 2011, 16:09:07 »
Ecco a te:

Codice: [Seleziona]

[root@nikita ~]# modprobe /lib/modules/2.6.27.57-aspide/kernel/drivers/mmc/host/sdhci.ko
FATAL: Module /lib/modules/2.6.27.57_aspide/kernel/drivers/mmc/host/sdhci.ko not found.
[root@nikita ~]# modprobe /lib/modules/2.6.27.57-aspide/kernel/drivers/mmc/host/sdhci-pci.ko
FATAL: Module /lib/modules/2.6.27.57_aspide/kernel/drivers/mmc/host/sdhci_pci.ko not found.
[root@nikita ~]#


Offline dankan77

  • Moderator
  • Hero Member
  • *****
  • Post: 1365
    • Mostra profilo
    • E-mail
Re: Lettore Secure Digital
« Risposta #13 il: 17 Giugno 2011, 16:23:46 »
Oki... prova con

updatedb

una volta ultimato esegui

locate sdhci.ko
locate sdhci-pci.ko

a questo punto necessario identificare il kernel attuale con

uname -a

modprobe "percorso per kernel sdhci.ko"
modprobe "percorso per kernel sdhci-pci.ko"

Posta pure il risultato

Offline Yoghi

  • Full Member
  • ***
  • Post: 66
    • Mostra profilo
Re: Lettore Secure Digital
« Risposta #14 il: 17 Giugno 2011, 16:26:27 »
non ho updatedb

 

Notizie

Registrati ora per avere pieno accesso a tutte le risorse della community , necessaria anche per area download, i link nei post, e altre funzioni.

Collegamenti

Posts Recenti

Utenti
  • Utenti in totale: 5959
  • Ultimo: Sina
Statistiche
  • Post in totale: 13156
  • Topic in totale: 2961
  • Online Oggi: 170
  • Massimi online: 9639
  • (14 Gennaio 2020, 10:20:21)
Utenti Online
Utenti: 0
Visitatori: 152
Totale: 152

Permessi

-no content-

ShoutBox!

Ultimo 5 Shout:

fzphoto

19 Febbraio 2018, 09:18:24
Ciao a tutti. Ho installato l'ultima versione di centos 7 per poter lavorare comodamente con DaVinci resolve 14. Solo che non riesco, ne a installare il programma Davinci, ne tanto meno, il driver nvidia per la scheda grafica geoforce 1080 ti. Sul web non trovo niente che mi aiuti. Premetto che sono

aner64

07 Febbraio 2018, 11:21:40
Buongiorno. Ho installato l'ultima versione di CENTOS7 aggiornata alla 7.0.4.1708. Ho bisogno di fare un restore di file da un filesystem reiserfs. CENTOS7 non ha reiserfs tra i FS e bisogna installarlo. Quando di cerca di installare kmod-reiserfs-0.0-2.el7.elrepo.x86_64.rpm escono errori per mancan
 

LonelyWolf

28 Dicembre 2017, 08:37:34
da ieri non vedo pi il css solo un problema mio?

trattore

28 Settembre 2015, 03:30:48
ma qui non c' mai nessuno
 ;)

ivo

26 Agosto 2015, 16:01:14
Ho configurato il DHCP creato il file /etc/dhcpd.conf con il seguente contenuto
-------------------------------------------------------------------------------
ddns-update-style interim;
ignore client-updates;

authoritative;

subnet 172.16.208.96 netmask 255.255.255.240 {
    option routers      

Mostra ultimi 50