Post recenti

Pagine: 1 2 [3] 4 5 ... 10
21
Software / Re:Problemi con il PHP
« Ultimo post da mingio52 il 05 Gennaio 2021, 14:31:48 »

Grazie ho forzati io a 777, era uno dei tanti tentativi.
22
Software / Re:Problemi con il PHP
« Ultimo post da LonelyWolf il 05 Gennaio 2021, 12:27:18 »
Nella configurazione di Apache: ErrorLog e LogLevel

E mi ero dimenticato di scriverti che questo:

Le cartelle sono 777 e Selinux è disabilitato.

a livello di sicurezza è la cosa peggiore.
23
Software / Re:Problemi con il PHP
« Ultimo post da mingio52 il 05 Gennaio 2021, 09:11:43 »
Scusami ma non ho mai attivato il log, come devo fare?
Grazie
24
Software / Re:Problemi con il PHP
« Ultimo post da LonelyWolf il 05 Gennaio 2021, 08:46:34 »
Abilita il log e controlla, troverai sicuramente l'errore
25
Software / Re:Problemi con il PHP
« Ultimo post da mingio52 il 05 Gennaio 2021, 08:28:03 »
Le cartelle sono 777 e Selinux è disabilitato.
26
Software / Re:Problemi con il PHP
« Ultimo post da LonelyWolf il 04 Gennaio 2021, 09:10:25 »
Hai controllato i permessi delle cartelle e le etichette selinux?
27
Le due schede di rete usano lo stesso driver?

Si...

ethtool --driver enp1s0
driver: r8169
version:
firmware-version: rtl8168e-3_0.0.4 03/27/12
expansion-rom-version:
bus-info: 0000:01:00.0
supports-statistics: yes
supports-test: no
supports-eeprom-access: no
supports-register-dump: yes
supports-priv-flags: no

ethtool --driver enp2s0
driver: r8169
version:
firmware-version: rtl8168e-3_0.0.4 03/27/12
expansion-rom-version:
bus-info: 0000:02:00.0
supports-statistics: yes
supports-test: no
supports-eeprom-access: no
supports-register-dump: yes
supports-priv-flags: no

28
Software / Problemi con il PHP
« Ultimo post da mingio52 il 30 Dicembre 2020, 13:55:24 »
Istallato come sempre sun una nuova macchina il localhost ( Lamp) con il php 7.2, però non risdco ad effettura nessuna scrittura utilizzando il PHP sembra quasi che manchino dei privileggi, ho controllato rispetto ad altre istallazioni sembra tutto corretto, ho istallazto anche su altre macchine ma il risultato è lo stesso. Tutto è cominciato si può dire due tre mesi fa. Sto' sbattendo la testa ma non trovo la soluzione.
Qualcuno ha avuto lo stesso preoblema?

Grazie
29
Le due schede di rete usano lo stesso driver?
30
C'è qualcosa nei log in prossimità dell'orario?
Driver della scheda aggiornato?

No, nei log nulla che possa essere correlato con questa cosa.

Nel cron di test che lancio ogni 20 minuti, però, ho l'output di qualche tool nel momento in cui l'ethernet è down.
Te li appendo qui sotto, magari c'è qualcosa che mi è sfuggito.:

[->POST LUNGO!<-]

================================================================================
= [START] ETHTOOL
================================================================================
Settings for enp1s0:
       Supported ports: [ TP MII ]
       Supported link modes:   10baseT/Half 10baseT/Full
                               100baseT/Half 100baseT/Full
                               1000baseT/Half 1000baseT/Full
       Supported pause frame use: Symmetric Receive-only
       Supports auto-negotiation: Yes
       Supported FEC modes: Not reported
       Advertised link modes:  10baseT/Half 10baseT/Full
                               100baseT/Half 100baseT/Full
                               1000baseT/Half 1000baseT/Full
       Advertised pause frame use: Symmetric Receive-only
       Advertised auto-negotiation: Yes
       Advertised FEC modes: Not reported
       Link partner advertised link modes:  10baseT/Half 10baseT/Full
                                            100baseT/Half 100baseT/Full
                                            1000baseT/Full
       Link partner advertised pause frame use: Symmetric Receive-only
       Link partner advertised auto-negotiation: Yes
       Link partner advertised FEC modes: Not reported
       Speed: 1000Mb/s
       Duplex: Full
       Port: MII
       PHYAD: 0
       Transceiver: internal
       Auto-negotiation: on
       Supports Wake-on: pumbg
       Wake-on: d
       Current message level: 0x00000033 (51)
                            drv probe ifdown ifup
       Link detected: yes    <-- Questa sembra ON
--------------------------------------------------------------------------------
- [-END-] ETHTOOL enp1s0
--------------------------------------------------------------------------------

Settings for enp2s0:
       Supported ports: [ TP MII ]
       Supported link modes:   10baseT/Half 10baseT/Full
                               100baseT/Half 100baseT/Full
                               1000baseT/Half 1000baseT/Full
       Supported pause frame use: Symmetric Receive-only
       Supports auto-negotiation: Yes
       Supported FEC modes: Not reported
       Advertised link modes:  10baseT/Half 10baseT/Full
                               100baseT/Half 100baseT/Full
                               1000baseT/Half 1000baseT/Full
       Advertised pause frame use: Symmetric Receive-only
       Advertised auto-negotiation: Yes
       Advertised FEC modes: Not reported
       Link partner advertised link modes:  10baseT/Half 10baseT/Full
                                            100baseT/Half 100baseT/Full
                                            1000baseT/Full
       Link partner advertised pause frame use: Symmetric
       Link partner advertised auto-negotiation: Yes
       Link partner advertised FEC modes: Not reported
       Speed: 1000Mb/s
       Duplex: Full
       Port: MII
       PHYAD: 0
       Transceiver: internal
       Auto-negotiation: on
       Supports Wake-on: pumbg
       Wake-on: d
       Current message level: 0x00000033 (51)
                            drv probe ifdown ifup
       Link detected: yes     <-- Anche questa sembra ON
--------------------------------------------------------------------------------
- [-END-] ETHTOOL enp2s0
--------------------------------------------------------------------------------

================================================================================
= [START] IP ADDR
================================================================================
2: enp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether 40:62:31:11:c0:a4 brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.3/24 brd 192.168.1.255 scope global noprefixroute enp1s0
       valid_lft forever preferred_lft forever
    inet6 fe80::4262:31ff:fe11:c0a4/64 scope link
       valid_lft forever preferred_lft forever
--------------------------------------------------------------------------------
- [-END-] IP ADDR enp1s0
--------------------------------------------------------------------------------

3: enp2s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc htb state UP group default qlen 1000
    link/ether 40:62:31:11:c0:a5 brd ff:ff:ff:ff:ff:ff
    inet xxx.xxx.117.155/29 brd xxx.xxx.117.159 scope global noprefixroute enp2s0
       valid_lft forever preferred_lft forever
    inet6 fe80::4262:31ff:fe11:c0a5/64 scope link
       valid_lft forever preferred_lft forever
--------------------------------------------------------------------------------
- [-END-] IP ADDR enp2s0
--------------------------------------------------------------------------------

================================================================================
= [START] ROUTE
================================================================================
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
0.0.0.0         xxx.xxx.117.153 0.0.0.0         UG    101    0        0 enp2s0
xxx.xxx.117.152 0.0.0.0         255.255.255.248 U     101    0        0 enp2s0
192.168.1.0     0.0.0.0         255.255.255.0   U     100    0        0 enp1s0
--------------------------------------------------------------------------------
- [-END-] ROUTE
--------------------------------------------------------------------------------

================================================================================
= [START] PING
================================================================================
PING 192.168.1.254 (192.168.1.254) from 192.168.1.3 enp1s0: 56(84) bytes of data.
64 bytes from 192.168.1.254: icmp_seq=1 ttl=64 time=0.153 ms
64 bytes from 192.168.1.254: icmp_seq=2 ttl=64 time=0.162 ms
64 bytes from 192.168.1.254: icmp_seq=3 ttl=64 time=0.160 ms

--- 192.168.1.254 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 27ms
rtt min/avg/max/mdev = 0.153/0.158/0.162/0.011 ms
--------------------------------------------------------------------------------
- [-END-] PING enp1s0
--------------------------------------------------------------------------------

PING 8.8.8.8 (8.8.8.8) from xxx.xxx.117.155 enp2s0: 56(84) bytes of data.

--- 8.8.8.8 ping statistics ---
3 packets transmitted, 0 received, 100% packet loss, time 43ms   <-- QUI enp2s0 è DOWN

--------------------------------------------------------------------------------
- [-END-] PING enp2s0
--------------------------------------------------------------------------------

================================================================================
= [START] TRACEROUTE
================================================================================
traceroute to 192.168.1.254 (192.168.1.254), 5 hops max, 60 byte packets
 1  192.168.1.254  0.142 ms  0.087 ms  0.052 ms
--------------------------------------------------------------------------------
- [-END-] TRACEROUTE enp1s0
--------------------------------------------------------------------------------

traceroute to 8.8.8.8 (8.8.8.8), 15 hops max, 60 byte packets    <-- ma QUI è tornata online
 1  xxx.xxx.117.153  0.444 ms  0.390 ms  0.493 ms
 2  xxx.xxx.192.132  19.687 ms  19.650 ms  19.605 ms
 3  185.25.74.93  23.122 ms  23.280 ms  23.240 ms
 4  185.25.74.66  23.880 ms  23.929 ms  23.966 ms
 5  185.25.74.134  24.074 ms  24.035 ms  23.991 ms
 6  82.113.198.90  22.930 ms  22.872 ms  22.863 ms
 7  74.125.245.225  23.360 ms 108.170.245.65  21.209 ms 74.125.245.241  21.352 ms
 8  172.253.69.255  20.843 ms 216.239.50.221  21.165 ms 216.239.49.181  20.991 ms
 9  8.8.8.8  20.939 ms  20.792 ms  20.689 ms
--------------------------------------------------------------------------------
- [-END-] TRACEROUTE enp2s0
--------------------------------------------------------------------------------

================================================================================
= [START] WGET
================================================================================
Spider mode enabled. Check if remote file exists.
--2020-12-29 16:40:17--  https://www.google.com/
Resolving www.google.com (www.google.com)... 172.217.168.4
Connecting to www.google.com (www.google.com)|172.217.168.4|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: unspecified [text/html]
Remote file exists and could contain further links,
but recursion is disabled -- not retrieving.

--------------------------------------------------------------------------------
- [-END-] WGET
--------------------------------------------------------------------------------

================================================================================
= [START] JOURNAL
================================================================================
-- Logs begin at Mon 2020-12-21 16:22:56 CET, end at Tue 2020-12-29 16:40:01 CET. --
Dec 29 15:40:12 xxxxxxx-xxx.xxxxxxxxxxx.it sshd[84074]: Connection closed by xxx.xxx.152.106 port 49950 [preauth]
Dec 29 15:45:12 xxxxxxx-xxx.xxxxxxxxxxx.it sshd[84095]: Connection closed by xxx.xxx.152.106 port 50058 [preauth]
Dec 29 15:50:12 xxxxxxx-xxx.xxxxxxxxxxx.it sshd[84117]: Connection closed by xxx.xxx.152.106 port 50163 [preauth]
Dec 29 15:55:12 xxxxxxx-xxx.xxxxxxxxxxx.it sshd[84139]: Connection closed by xxx.xxx.152.106 port 50272 [preauth]
Dec 29 16:00:01 xxxxxxx-xxx.xxxxxxxxxxx.it CROND[84161]: (root) CMD (cd /root/bin/EthDownDump; ./SetON.sh; ./DumpData.sh; ./SetOFF.sh)
Dec 29 16:00:12 xxxxxxx-xxx.xxxxxxxxxxx.it sshd[84186]: Connection closed by xxx.xxx.152.106 port 50382 [preauth]
Dec 29 16:01:01 xxxxxxx-xxx.xxxxxxxxxxx.it CROND[84208]: (root) CMD (run-parts /etc/cron.hourly)
Dec 29 16:01:01 xxxxxxx-xxx.xxxxxxxxxxx.it run-parts[84211]: (/etc/cron.hourly) starting 0anacron
Dec 29 16:01:01 xxxxxxx-xxx.xxxxxxxxxxx.it run-parts[84217]: (/etc/cron.hourly) finished 0anacron
Dec 29 16:05:12 xxxxxxx-xxx.xxxxxxxxxxx.it sshd[84219]: Connection closed by xxx.xxx.152.106 port 50491 [preauth]
Dec 29 16:07:46 xxxxxxx-xxx.xxxxxxxxxxx.it systemd[1]: Starting dnf makecache...
Dec 29 16:07:47 xxxxxxx-xxx.xxxxxxxxxxx.it dnf[84239]: Metadata cache refreshed recently.
Dec 29 16:07:47 xxxxxxx-xxx.xxxxxxxxxxx.it systemd[1]: dnf-makecache.service: Succeeded.
Dec 29 16:07:47 xxxxxxx-xxx.xxxxxxxxxxx.it systemd[1]: Started dnf makecache.
Dec 29 16:10:12 xxxxxxx-xxx.xxxxxxxxxxx.it sshd[84245]: Connection closed by xxx.xxx.152.106 port 50599 [preauth]
Dec 29 16:15:12 xxxxxxx-xxx.xxxxxxxxxxx.it sshd[84266]: Connection closed by xxx.xxx.152.106 port 50708 [preauth]
Dec 29 16:20:01 xxxxxxx-xxx.xxxxxxxxxxx.it CROND[84288]: (root) CMD (cd /root/bin/EthDownDump; ./SetON.sh; ./DumpData.sh; ./SetOFF.sh)
Dec 29 16:20:12 xxxxxxx-xxx.xxxxxxxxxxx.it sshd[84313]: Connection closed by xxx.xxx.152.106 port 50817 [preauth]
Dec 29 16:25:12 xxxxxxx-xxx.xxxxxxxxxxx.it sshd[84337]: Connection closed by xxx.xxx.152.106 port 50922 [preauth]
Dec 29 16:40:01 xxxxxxx-xxx.xxxxxxxxxxx.it CROND[84361]: (root) CMD (cd /root/bin/EthDownDump; ./SetON.sh; ./DumpData.sh; ./SetOFF.sh)
       Nessuna riga dopo le 16:25, riparte solo dopo il lancio di questo script alle 16:40
--------------------------------------------------------------------------------
- [-END-] JOURNAL
--------------------------------------------------------------------------------

================================================================================
= [START] LOGS
================================================================================
Dec 29 15:02:32 xxxxxxx-xxx dsmc[1026]: Elapsed processing time:               00:00:09
Dec 29 15:02:32 xxxxxxx-xxx dsmc[1026]: Scheduled event 'EVERY03H' completed successfully.
Dec 29 15:02:32 xxxxxxx-xxx dsmc[1026]: Sending results for scheduled event 'EVERY03H'.
Dec 29 15:02:32 xxxxxxx-xxx dsmc[1026]: Results sent to server for scheduled event 'EVERY03H'.
Dec 29 15:02:32 xxxxxxx-xxx dsmc[1026]: ANS1483I Schedule log pruning started.
Dec 29 15:02:32 xxxxxxx-xxx dsmc[1026]: ANS1484I Schedule log pruning finished successfully.
Dec 29 15:02:32 xxxxxxx-xxx dsmc[1026]: IBM Spectrum Protect Backup-Archive Client Version 8, Release 1, Level 11.0
Dec 29 15:02:32 xxxxxxx-xxx dsmc[1026]: Querying server for next scheduled event.
Dec 29 15:02:32 xxxxxxx-xxx dsmc[1026]: Node Name: XXX_XXXXXXX-APP
Dec 29 15:06:46 xxxxxxx-xxx systemd[1]: Starting dnf makecache...
Dec 29 15:06:48 xxxxxxx-xxx dnf[83882]: CentOS Linux 8 - AppStream                      5.6 kB/s | 4.3 kB     00:00
Dec 29 15:06:48 xxxxxxx-xxx dnf[83882]: CentOS Linux 8 - BaseOS                          27 kB/s | 3.9 kB     00:00
Dec 29 15:06:49 xxxxxxx-xxx dnf[83882]: CentOS Linux 8 - Extras                         2.7 kB/s | 1.5 kB     00:00
Dec 29 15:06:50 xxxxxxx-xxx dnf[83882]: Metadata cache created.
Dec 29 15:06:50 xxxxxxx-xxx systemd[1]: dnf-makecache.service: Succeeded.
Dec 29 15:06:50 xxxxxxx-xxx systemd[1]: Started dnf makecache.
Dec 29 16:07:46 xxxxxxx-xxx systemd[1]: Starting dnf makecache...
Dec 29 16:07:47 xxxxxxx-xxx dnf[84239]: Metadata cache refreshed recently.
Dec 29 16:07:47 xxxxxxx-xxx systemd[1]: dnf-makecache.service: Succeeded.
Dec 29 16:07:47 xxxxxxx-xxx systemd[1]: Started dnf makecache.
--------------------------------------------------------------------------------
- [-END-] MESSAGES
--------------------------------------------------------------------------------

Dec 29 14:50:13 xxxxxxx-app sshd[83747]: Connection closed by xxx.xxx.152.106 port 48870 [preauth]
Dec 29 14:55:13 xxxxxxx-app sshd[83768]: Connection closed by xxx.xxx.152.106 port 48980 [preauth]
Dec 29 15:00:13 xxxxxxx-app sshd[83815]: Connection closed by xxx.xxx.152.106 port 49086 [preauth]
Dec 29 15:05:13 xxxxxxx-app sshd[83861]: Connection closed by xxx.xxx.152.106 port 49195 [preauth]
Dec 29 15:10:13 xxxxxxx-app sshd[83891]: Connection closed by xxx.xxx.152.106 port 49304 [preauth]
Dec 29 15:15:13 xxxxxxx-app sshd[83913]: Connection closed by xxx.xxx.152.106 port 49413 [preauth]
Dec 29 15:20:14 xxxxxxx-app sshd[83961]: Connection closed by xxx.xxx.152.106 port 49518 [preauth]
Dec 29 15:25:14 xxxxxxx-app sshd[83984]: Connection closed by xxx.xxx.152.106 port 49628 [preauth]
Dec 29 15:30:13 xxxxxxx-app sshd[84006]: Connection closed by xxx.xxx.152.106 port 49733 [preauth]
Dec 29 15:35:12 xxxxxxx-app sshd[84027]: Connection closed by xxx.xxx.152.106 port 49840 [preauth]
Dec 29 15:40:12 xxxxxxx-app sshd[84074]: Connection closed by xxx.xxx.152.106 port 49950 [preauth]
Dec 29 15:45:12 xxxxxxx-app sshd[84095]: Connection closed by xxx.xxx.152.106 port 50058 [preauth]
Dec 29 15:50:12 xxxxxxx-app sshd[84117]: Connection closed by xxx.xxx.152.106 port 50163 [preauth]
Dec 29 15:55:12 xxxxxxx-app sshd[84139]: Connection closed by xxx.xxx.152.106 port 50272 [preauth]
Dec 29 16:00:12 xxxxxxx-app sshd[84186]: Connection closed by xxx.xxx.152.106 port 50382 [preauth]
Dec 29 16:05:12 xxxxxxx-app sshd[84219]: Connection closed by xxx.xxx.152.106 port 50491 [preauth]
Dec 29 16:10:12 xxxxxxx-app sshd[84245]: Connection closed by xxx.xxx.152.106 port 50599 [preauth]
Dec 29 16:15:12 xxxxxxx-app sshd[84266]: Connection closed by xxx.xxx.152.106 port 50708 [preauth]
Dec 29 16:20:12 xxxxxxx-app sshd[84313]: Connection closed by xxx.xxx.152.106 port 50817 [preauth]
Dec 29 16:25:12 xxxxxxx-app sshd[84337]: Connection closed by xxx.xxx.152.106 port 50922 [preauth]
             QUI il check dall'esterno via SSH non riesce più a arrivare dopo le 16:25
--------------------------------------------------------------------------------
- [-END-] SECURE
--------------------------------------------------------------------------------

Pagine: 1 2 [3] 4 5 ... 10